Go
New
Find
Tools
Reply
  
  Login/Join 
Boost Monger
Posted
Have all the instruction pages been deleted?


2000 Emerald Mica, Hotside, HFI, SSAIC, AA/IC, BTB, 120/65, FM 2.5" midpipe, SPEC 2, Borla Duals, FM Sways, KYB AGX, FM Springs, Falken Hanabi's/RT615's
 
Posts: 351 | Location: Summerville, SC | Registered: August 01, 2005Reply With QuoteEdit or Delete MessageReport This Post
Boost Fan
Posted Hide Post
Hey George, what'd you need? I may have a copy of whatever you might have been looking for.
 
Posts: 40 | Location: Orange County, CA | Registered: February 19, 2004Reply With QuoteEdit or Delete MessageReport This Post
Jim
SOT Lurker
Posted Hide Post
I need a set of instructiions for a 99. I just bought a used BRP mp62 hotside and want to install this weekend. Thanx.....Jim
 
Posts: 2 | Location: Lincolnton, NC | Registered: October 14, 2004Reply With QuoteEdit or Delete MessageReport This Post
Boost Fan
Posted Hide Post
Jim,
Sent you the old S1, 6-rib instructions, JRPC install instructions, and an old PDF of an S1 dyno vs stock.

During it's heyday, BRP was doing a lot of research and making constant upgrades. Your kit may vary slightly from the manual. For example, you may or may not have an SC underbrace. It's not completely necessary, but I'd consider it a recommended upgrade later on.
 
Posts: 40 | Location: Orange County, CA | Registered: February 19, 2004Reply With QuoteEdit or Delete MessageReport This Post
Jim
SOT Lurker
Posted Hide Post
Thanx for the instructions.
 
Posts: 2 | Location: Lincolnton, NC | Registered: October 14, 2004Reply With QuoteEdit or Delete MessageReport This Post
 Previous Topic | Next Topic powered by eve community  
 


© Copyright Stage One Tuning 2008-2010